Pre-heating oven
moulds

This oven has been designed to house the moulds before being installed on the press. The mould heated at approximately 150 °C allows a significant reduction in production start-up waiting times, reductions of approximately half the time have been made.

The oven is a traditional electric heating oven but with a very sturdy and resistant structure, inside the chambers there are roller conveyors of hardened material with bearings for high temperatures and an air circulation fan which guarantees excellent temperature distribution and a rapid heating of the moulds. Strong mechanical stops ensure that the mould is locked and secure.

The construction of these ovens is “dedicated” and they are designed according to customer specifications, of the quantity, of the minimum and maximum dimensions as well as the weight of the mould. They can be designed to house moulds vertically or horizontally.

Construction Data

Internal material: Steel
External material: Stainless-Steel
Maximum temperature:200°C
Seals: fiberglass for high temperatures
Power: 12 Kw
Weight:600 Kg

Characteristics

The oven is characterized by the numerous characteristics that allow to improve the post- curing process.

car-7

Ignition timer

car-8

Electric thermoregulator
improves control and temperature regulation

WE ARE ABLE TO PROVIDE MADE TO MEASURE OVENS STUDIED TO SATISFY YOUR NEEDS

REQUEST A FREE QUOTE

We are at your complete disposal to design a customized solution

What makes our oven range unique

Homogeneus
Temperature

Air flow management to obtain differences in temperature even better that 5 degrees.

O.R.S
Valve

Security valve for the reduction of oxygen in the chamber. It reduces the risk of a fire.

Safe
use

The interior of the chamber is completely “sealed” and doesn’t allow the fumes to pollute the insulation.

PLC
Siemens

The electric panel allows you to:
– have under control all the temperature parameters.
– interface and control the oven through a PC.
– record time/ temperature graphs

Exchanger
heat

It allows to pre-heat the incoming air by 30/50 °C, reducing energy consumption
and condense the outgoing fumes.

H.E.P.A.
Filters

Where it’s necessary to treat food o medical material, we filter incoming air through absolute filters.

Air
exchange

The post-curing of silicone requires a lot of attention for the exchange of fresh air, we can manage the correct quantity air with respect of the kg of the treated material.

Our Ovens

Oven studied for the treatment of post-curing of elastomer materials such as NBR, Silicone, Viton, etc.

Max Temp. 200 / 300°C

Oven studied for the treatment of post- curing of elastomer, such as O-ring, for which flatness is required.


Max temp. 300°C

Oven studied for the specific application of sintering treatments on PTFE polymers.


Max temp. 450°C

Oven designed to hold the moulds before being installed on the press.

Max temp. 200°C

Our Stoves

Avantgarde.Line drying and heating ovens with forced ventilation and advanced programming functions.

Max temp. 300°C

These chamber ovens equipped with an air circulation system are distinguished in particular by the excellent uniformity of the temperature that they allow to obtain.

Temp. max 850°C

Contact immediately our experts
for a free quote

Fill in the form below or call us at the number
+39 035 31.10.40

logo-forlab-footer.png

We have specialized for 20 years in the supply and consultancy of
scientific instrumentation for quality control and R&D laboratories.

Via Fiume Po, 50 – 24040 Stezzano (BG)
+39 035.31.10.40
www.forlabitalia.it