Industrial ovens specialized in the post-curing treatment of rubber materials for automotive sector.

Why choose
a post-curing oven
for rubber materials?

Requests for the production of rubber items and seals in the automotive sector are quite severe and require the use of high-performance elastomers. These performances are achieved only through the use of advanced moulding technologies and through post-curing ovens capable of guaranteeing complete vulcanization of the elastomer, stabilizing the hardness, improving its compression set and increasing its breaking load. The ovens available on the market were unsuitable as they were designed for “generic” use. For Lab Italia is able to supply customizable industrial ovens made with latest generation technologies, entirely dedicated to the rubber sector and specialized in the post-curing process.

What makes our oven range unique


Air flow management to obtain differences in temperature even better that 5 degrees.


Security valve for the reduction of oxygen in the chamber. It reduces the risk of a fire.


The interior of the chamber is completely “sealed” and doesn’t allow the fumes to pollute the insulation.


The electric panel allows you to:
– have under control all the temperature parameters.
– interface and control the oven through a PC.
– record time/ temperature graphs


It allows to pre-heat the incoming air by 30/50 °C, reducing energy consumption
and condense the outgoing fumes.


Where it’s necessary to treat food o medical material, we filter incoming air through absolute filters.


The post-curing of silicone requires a lot of attention for the exchange of fresh air, we can manage the correct quantity air with respect of the kg of the treated material.

Our Ovens

Oven studied for the treatment of post-curing of elastomer materials such as NBR, Silicone, Viton, etc.

Max Temp. 200 / 300°C

Oven studied for the treatment of post- curing of elastomer, such as O-ring, for which flatness is required.

Max temp. 300°C

Oven studied for the specific application of sintering treatments on PTFE polymers.

Max temp. 450°C

Oven designed to hold the moulds before being installed on the press.

Max temp. 200°C

Avantgarde.Line drying and heating ovens with forced ventilation and advanced programming functions.

Max temp. 300°C

These chamber ovens equipped with an air circulation system are distinguished in particular by the excellent uniformity of the temperature that they allow to obtain.

Temp. max 850°C

Deburring machine and Fixed bench

This deburring machine can work through manual cycles or automatic process, averaging 20 to 40 seconds per cycle. Simple to operate and with minimal energy consumption.

400m cylinder diameter

The Fixed bench is designed to open and close and rotate molds in total safety and complete automation. These operations are performed by a single operator.

Temp. max 220°C


We are at your complete disposal to design a customized solution

Contact immediately our experts
for a free quote

Fill in the form below or call us at the number
+39 035 31.10.40

    * Campi obbligatori


    We have specialized for 20 years in the supply and consultancy of
    scientific instrumentation for quality control and R&D laboratories.

    Via Fiume Po, 50 – 24040 Stezzano (BG)